If you want to bring your outdoor deck back to life, refinishing it is your best bet. Refinishing is a relatively simple process that can be done in just a few steps. It will leave your deck looking new without spending time and money on replacement boards or expensive repairs. Let’s walk through the efforts of cleaning, staining, and sealing your wood deck so that you can enjoy it for years.
Step One: Cleaning
The first step in refinishing your wood deck is through Deck Cleaning Charleston, SC. You’ll need a pressure washer with an adjustable nozzle, a stiff brush, detergent or cleaner specifically designed for wooden decks, and plenty of elbow grease. Start by wetting the surface with the pressure washer set on low pressure and work from one end of the deck to another in long sweeping motions. Once the entire surface has been wetted down, mix the cleaner according to directions and begin scrubbing with a stiff brush. Ensure all dirt, debris, mold, mildew, pollen, etc., are removed from the surface before moving to step two.
Step Two: Staining
After cleaning your wood deck thoroughly with a detergent or cleaner designed for wooden decks and allowing it to dry fully (which may take several days), the next step is staining (or painting). There are dozens of options available when choosing an appropriate stain for your wood deck – choose one that best fits your overall aesthetic while protecting against weather damage. When applying stain to your wood deck, start at one end of the board and work towards the other using long strokes. Allow each coat enough drying time before applying additional coats – typically, 24 hours should suffice, depending on humidity levels in your area.
Step Three: Sealing
After staining has been completed successfully, you’ll want to add an extra layer of protection against wear and tear using a sealant designed for outdoor use. A bond is not necessary but will significantly extend the life of your newly refinished wood deck over previously untreated surfaces. To apply sealant properly, start at one end of the board again, working towards the other using long strokes, ensuring all edges are covered completely before moving onto another board or section of boards previously treated with stain. As with staining, allow ample drying time between coats- usually, 48 hours should do, depending on humidity levels in your area, before walking or placing furniture on top of freshly sealed boards- no less than 72 hours!
These methods alone will help ensure your newly refinished wood deck remains intact for many years of enjoyment. Regular maintenance is an important part of keeping a wood deck looking its best- cleaning it with mild detergent at least twice a year to remove any dirt or grime buildup and re-applying sealant, as the manufacturer should do the trick.
Refinishing a wood deck is more than worth the cost when you consider how much time, effort, and money it will save you in the long run. With proper maintenance and care, your wood deck should last for years.
Refinishing a wood deck doesn’t have to be intimidating! With some elbow grease and proper care, you can make even an old weathered wood look new in just three easy steps! By following these instructions, you can transform any tired old outdoor space into an inviting gathering spot for friends & family alike – all while protecting its longevity too! So don’t wait – get out there today & get started bringing back that shine! You won’t regret it!